din2midi2din v2 | audiowerkstatt.de

Info

The audiowerkstatt din2midi2din v2 converts the synchronisation-signale known as „DIN-Sync“ or „Sync24“ or „Sync48“ to MIDI-clock-signals and vice versa.

Price (19% tax incl.)

149,00 €

Price (without tax - only for export)

125,21 €

More images

More info

The audiowerkstatt din2midi2din v2 has a MIDI- and a DIN-sync-output and on both outputs a clock-signal is sent at the same time.

With a button you can select, if the clock-signal present at the DIN-sync- or the MIDI-input is used. A LED indicates the selected input.

The device operates as a standard in "Sync24"-mode (24 clock pulses per quarter note). By holding the button when switching on, the device is started in "Sync48"-mode (48 clock pulses per quarter note).

All settings will be saved and restored at startup.

Details can be found in the manual.

Specifications

Connectors:

MIDI in (5-pol DIN)

MIDI out (5-pol DIN)

DIN-sync in (5-pol DIN)

DIN-sync out (5-pol DIN)

Power (plug 5,5mm, pin 2,1mm)

(Power-Supply-Unit not included!)

Power:

9-12V AC or DC (polarity doesn´t matter)

Dimensions:

112 mm x 72 mm x 48 mm

Weight:

280g

Downloads

audiowerkstatt_din2midi2din_v2_manual.pdf

Video

Product safety

MANUFACTURER INFORMATION:
---------------------------
audiowerkstatt UG (haftungsbeschränkt)
Weserstr. 78
12059 Berlin
Deutschland

E-Mail: info[at]audiowerkstatt.de

SAFETY INSTRUCTIONS
--------------------
Product Safety Information

Standalone MIDI/DIN-Sync Processing Tool
Important Safety Information

This product is a standalone MIDI/DIN-sync processing tool designed for use in music production and performance environments. Please read this safety guide thoroughly before using the product.

General Warnings
Electrical Safety:
Use only a manufacturer-approved wall adapter.
Ensure the power outlet voltage matches the adapter’s input requirements.
Do not use the device if the wall adapter, cable, or connectors appear damaged.

Risk of Electric Shock:
Do not open the device enclosure or attempt to repair the product. Internal components carry electrical currents that could cause injury.
Avoid exposing the device to moisture, liquids, or excessive humidity to prevent electric shock or damage.

Heat Generation:
The device may generate heat during prolonged use. Ensure adequate ventilation and avoid covering the unit while in operation.
Do not place the device near heat sources such as radiators or direct sunlight.

Choking Hazard:
The product contains small parts and should be kept away from children under 3 years old.

Cables and Connections:
Route cables safely to avoid tripping hazards or damage.
Do not force connectors into ports; ensure alignment before insertion.
Environmental Considerations:
Do not expose the product to extreme temperatures, vibrations, or impacts, as these may damage the device or impair functionality.

Usage Instructions
Connect the provided wall adapter to a power outlet that matches the adapter’s voltage rating.
Plug the adapter into the device’s power input port.
Use appropriate MIDI or DIN-sync cables to connect the tool to your other equipment, ensuring proper alignment of connectors.
Turn on the device using the power switch (if available) and configure it as instructed in the user manual.

Maintenance and Cleaning
Disconnect the device from power before cleaning.
Use a dry or slightly damp cloth to clean the exterior. Avoid using harsh chemicals or solvents.

Environmental Safety
At the end of its life, dispose of the product, cables, and wall adapter in accordance with local electronic waste recycling regulations.

Liability Disclaimer
The manufacturer is not responsible for injuries, damages, or malfunctions caused by improper use, unauthorized modifications, or the use of non-approved power adapters or accessories.

Deutsch